Autowatch Ghost Immobiliser Installation
The Ghost is the UK's most advanced aftermarket immobiliser that works with CAN buses. It's discreet, doesn't use LED indications or key fobs and is concealed in the vehicle's wiring.
The user can also disable the system temporarily using Transport Mode when renting their vehicle. This guide will guide you through the installation process of a Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser is a modern security device that guards your vehicle against key cloning, hacking and relay attacks. The system is connected directly to the ECU of your car and protected by a pin code that you choose. It is undetectable by thieves using diagnostic scanners or other advanced methods. It cannot be disabled by cutting circuits.
The system is simple to use, however it's essential to use a an expert installation to ensure a smooth and secure connection to your vehicle's ECU. A Thatcham-approved installer can help with the installation and programming of your Ghost system. They can also suggest a tracking system or alarm to complement your vehicle's security package.
The first step is to disconnect the battery to prevent the possibility of airbag deployment and short circuits. When the battery is disconnected, the installer may start working safely. Basic hand tools can be used to ensure precise connections. A multimeter is a great tool to test electrical values. Insulation tape and cable ties are also necessary for securing connections and keeping wiring neat. In addition, the user's manual provides specific guidance tailored to the Ghost Immobiliser model you have.
During the installation process, it's essential to choose an area for grounding that is free of any paint or debris. The installer must be sure that the immobiliser's CAN H and CAN L wires are connected to the correct ports on the vehicle's ECU. Depending on the model, these wires may need to be soldered or plugged into. To ensure a secure and durable connection it is recommended you use a high-quality plug.
After the installation is completed Once the installation is completed, the customer can enable the Transport Mode. This allows the vehicle to be used by valet parking or mechanics without having to know the pin code. The customer has to press the icon for service on the dashboard five times within two seconds. After that, the system will confirm with 5 indication signals.
The Autowatch Ghost 2 is a highly efficient immobiliser that's TASSA certified and Thatcham approved. It's a smart option for those who regularly rents out their cars on platforms like Turo. Having an immobiliser can also lower insurance costs since it reduces the likelihood of theft.
Getting Started
You can't go far wrong with an autowatch immobiliser in order to guard your car from theft. The device protects your vehicle from being started even the theft or copies the key. This is due to its high-tech technology that is designed to prevent the engine from running until the correct PIN code is entered.
The device is connected to the vehicle's bus network, CAN, allowing direct communication with the ECU. It uses the buttons on your dashboard and steering wheel to create a unique sequence which only you are aware of. This makes it impossible for anyone else to start your vehicle. This is the ultimate system to safeguard your pride and joy. It will not lose its value in the event that you decide to sell it.
Installing a ghost ignition is a simple process, but it is important to follow the instructions carefully to avoid problems with the electrical system and malfunctions. First, you must locate and identify a constant 12V power source as well as an appropriate grounding point on the vehicle's chassis. Then, you can start connecting the wires to the immobiliser. Use high-quality connectors, and soldering techniques to ensure a solid connection. Also, make sure to protect the connections by insulating them with heat shrink tubing and insulation tape to protect them from electrical short circuits and other issues.
After the wires have been connected, you can reconnect the battery and turn on the engine to test the immobiliser's function. After you've confirmed that everything is working properly and you are satisfied, you can place the immobiliser in a secure place inside the vehicle. Be sure to hide it in a secure manner so that a thief cannot tamper with it.
click home page has been TASSA (Tracker and Aftermarket Security System Association) that means it's a top-quality deterrent to car burglars. It is invulnerable to key cloning and hacking and is not able to be disabled without the code. It is simple to use, and can be set into a service valet setting so that your vehicle will not be activated when you take it to an MOT or for servicing.
Wiring
The Ghost Immobiliser is a cutting-edge security system designed to stop theft of vehicles. It connects directly to the vehicle's CAN bus network and communicates with the ECU, making it a virtually undetectable addition to your car. In contrast to other aftermarket systems that require the removal of circuit components The Ghost Immobiliser does not interfere with the factory settings for your vehicle.
It's also undetectable to thieves using diagnostic scanning devices. The system doesn't send or receive radio frequency signals, but instead uses CAN data to communication with your ECU. It doesn't even require any modifications to your current key fobs.
To use the Ghost Immobiliser, simply switch on the ignition in your car and enter your disarm sequence (either one or two buttons). The indicator will flash twice to confirm that you have entered the correct code. You are now able to begin driving your car safely.
Once installed, the Ghost Immobiliser guards your vehicle from hacking or key cloning while preserving its value. In Transport Mode you can temporarily disable the Ghost Immobiliser in case you need to hand your car to service or valet parking.
You'll require a constant power source (12V) and a grounding point to complete the installation of the Ghost immobiliser. Make sure that both are properly insulated and can be touched. Cable ties are also recommended to secure the wires. This will reduce the risk of theft by potential thieves. To avoid making mistakes, make sure to double-check these points and mark them using a label or tape. It's recommended to check every connection for signs of wear and tear. Connectors that are loose could cause system malfunctions, so be sure they're securely in place and properly insulated. Also, don't forget test the Ghost Immobiliser after installation is completed. This will ensure that the unit is working properly and that all connections and insulation are safe. If there are any issues, make certain to fix them immediately.
Testing
The Autowatch Ghost Immobiliser is an innovative vehicle security system that is integrated into your car's ECU to prevent the engine from starting without authorization. Its innovative technology protects your vehicle from hacking, key cloning, and other methods that thieves employ to steal vehicles. The Ghost is also able to work in conjunction with other alarm and tracking systems to offer the most complete protection for your vehicle. The Ghost's unique features, coupled with its subtle design, make it a popular option for both car enthusiasts as well as security-conscious drivers.
It is important to follow the steps of installation to ensure a correct integration of the Ghost Immobiliser. The best place to start is to look over the vehicle's wiring diagram that serves as a guideline to locate and connecting the wires required. You'll then need to identify the power and grounding sources. Once you've identified these then you'll have to mark them in a way that they're easily identifiable during the installation process. It is essential to use top-quality materials and tools. Hand tools are essential to aid in making precise connections. A multimeter can verify electrical values, and ensure safety. Cable ties and insulation tape can help keep connections neat and tidy. Finally, a user manual will give specific guidelines specific to your Ghost model.
Before proceeding with the installation it is important to test the system by entering the PIN code and then starting the vehicle. This step will confirm the immobiliser functions as intended and prevent unauthorised vehicle starts. It's recommended to perform this step regularly as part of your routine inspections of the vehicle to ensure the system is always functioning correctly.
After the installation is completed, you can begin driving your car with confidence. The Ghost will help keep your pride and joy safe from potential thieves, ensuring that nobody can drive off with your vehicle without the proper PIN code. The Ghost can be used in conjunction with an approved Thatcham tracker that detects any attempts at theft or tampering. This lets you locate your car if it's stolen.
The Ghost is compatible with a variety of vehicles, including those made by the majority of major manufacturers. If you're looking to secure your vehicle with this cutting-edge device, contact Monty's Locksmith today to learn more about our installation and service options. We are a TASSA registered installer, a certificate that ensures that we adhere to strict standards for the installation of our products. This guarantees customers insurance companies, customers, and law enforcement agencies that all installations are carried out safely and in a safe manner.